Skip to content
Dry type transformer 10KV
Transformer · Dry type transformer

Dry type transformer 10KV

Or email sales@banglamark.com.bd

Details.

10kV Dry Type: This transformer is suited to urban power network upgrades and is used in urban power grids, high-rise buildings, business centres, theatres, hospitals, tunnels, metro systems, airports and similar sites. The SC(B)10/11 epoxy cast dry-type transformer has high mechanical and electrical strength and good heat resistance. It is cast in class F epoxy resin with filler after vacuum thin-film degassing.

Features

  • Strong short-circuit withstand, low loss, low no-load current, strong impact resistance, low partial discharge, low noise, good heat sinking capacity.
  • Performance parameters exceed GB and IEC standards.
  • Safe, flame retardant, fireproof and non-polluting; can be installed directly at the load.
  • Maintenance-free, easy to install, low operating costs.
  • High reliability, high mechanical strength.
  • Good seismic capability.
  • Good anti-moisture & anti-corrosion features.
  • Good overload capability: without forced-air cooling it can run at 120% load long term.
  • Suitable for substations in densely populated, cramped urban areas.

Normal service conditions

Altitude: ≤1000m

Ambient air temperature

Maximum temperature: +40°C

Minimum temperature: -25°C (Outdoor dry type power transformer)

Minimum temperature: -5°C (Indoor dry type power transformer)

Highest monthly average temperature: +30°C

Highest annual average temperature: +20°C

Relative air humidity: ≤90%; there should be no water on the coil surface. The three-phase supply voltage should be approximately symmetrical and the voltage waveform approximately sinusoidal.

Parameters

Model Rated Capacity (kVA) Voltage (kV) Vector Group No-load Loss (W) Load Loss (W) Weight (kg) Reference Dimensions (mm)LWH Enclosure Dimensions (mm)LWH Total Weight (kg) Impedance Voltage High Voltage (%)
High Voltage (%)H.V. Low Voltage L.V.
SC10-30 30 6,6.3, 10, 10.5,11 0.4 Dyn11 Yyn0 190 710 250 680450640 10808501020 400 4
SC10-50 50 270 1000 300 700450640 11008501040 450
SC10-80 80 370 1380 430 860450760 12608501150 600
SC10-100 100 400 1570 630 920780900 150013002200 830
SC10-125 125 470 1850 700 920780950 150013002200 900
SC10-160 160 540 2130 800 9207801000 150013002200 1000
SC10-200 200 620 2530 950 1100780960 180013002200 1150
SC10-250 250 720 2760 1100 11009401150 180013002200 1300
SC10-315 315 880 3470 1300 11009401150 180013002200 1500
SC(B)10-400 400 980 3990 1500 11009401200 180013002200 1800
SC(B)10-500 500 1160 4880 2000 13509401200 200015002200 2250
SC(B)10-630 630 1340 5880 2050 13509401300 230015002200 2300
SC(B)10-630 630 1300 5960 2050 14009401130 230015002200 2300 6
SC(B)10-800 800 1520 6960 2350 14509401140 230015002200 2600
SC(B)10-1000 1000 1770 8130 2750 15009401250 230015002000 3000
SC(B)10-1250 1250 2090 9690 3100 15009401300 230018002200 3300
SC(B)10-1600 1600 2450 11730 3600 15509401410 230015002200 4000
SC(B)10-2000 2000 3050 14450 4600 165011901780 240016002200 5000
SC(B)10-2500 2500 3600 17170 5500 172011901800 250016002200 6000